>
Hyundai Equus Manuals

Hyundai Equus: Repair procedures - Electro chromic Inside Rear View Mirror - Body Electrical System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Repair procedures

Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Electro chromic Inside Rear View Mirror / Repair procedures

Inspection
Check it by the procedure below to see if the function of the ECM is normal.
1.
Turn the ignition key to the "ON" position.
2.
Cover the front looking sensor to stop functioning.
3.
Head a light to the rearward looking sensor.
4.
The ECM should be darkened as soon as the rearward looking sensor detects the light.
   
If this test is performed in daytime, the ECM may be darkened as soon as the front looking sensor is covered.
5.
When the reverse gear is engaged, the ECM should not be darkened.
When heading lights to both the front looking and rearward looking sensors, the ECM should not be darkened.
Removal
1.
Remove the mirror wiring cover (A).

2.
Remove the connector (B).

3.
Push the inside rear view mirror base up to remove the inside rear view mirror assembly (A) after removing the screw.

   
Make sure the spring mounting bracket and mirror not to be damaged.
Installation
1.
Install the mirror assembly.
2.
Install the mirror wiring cover and connector.
    Description and Operation
    Description The ECM (Electro Chromic inside rear view Mirror) is for dimming the reflecting light from a vehicle behind at night, in order the user not to be dazzled by the light. The front loo ...

    Compass Mirror Description and Operation
    Description The compass feature is designed to be integrated into an electro chromic interior rearview mirror. The mirror assembly shall display a compass heading. The compass mirror then take th ...

    See also:

    Trunk Lid Trim Components and Components Location
    Component Location 1. Trunk lid trim ...

    Brake Switch Repair procedures
    Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the lower crash pad. (Refer to the Body - "Crash Pad") 3. Disconnect the stop lamp switch con ...

    Lighting control
    The light switch has a Headlight and a Parking light position. To operate the lights, turn the knob at the end of the control lever to one of the following positions: (1) OFF position (2) Aut ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com