Hyundai Equus: Components and Components Location
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / BCM (Body Control Module) / Components and Components Location
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / BCM (Body Control Module) / Components and Components Location
| Components Location |
| 1. Smart Junction Box (SJB) 2 . Body Control Module (BCM) 3 . Smart Key Unit (SMK) 4 . Driver Door Module (DDM) | 5 . Assis Door Module (ADM) 6 . Cluster (CLU) 7 . Around View Monitoring (AVM) 8 . Memory seat unit (IMS) |
| Components |
Connector Pin Information
| No. | Connector A | Connector B | Connector C |
| 1 | Battery | B CAN high | - |
| 2 | IGN 2 | M CAN high | - |
| 3 | - | C CAN high | - |
| 4 | - | ATM solenoid | - |
| 5 | Trunk open switch | PAS ON indicator | - |
| 6 | - | - | - |
| 7 | PAS OFF switch | LIN PAS data | - |
| 8 | - | Defogger relay | - |
| 9 | - | B CAN low | - |
| 10 | - | M CAN low | Rear room lamp |
| 11 | Crash door unlock | C CAN low | Foot lamp |
| 12 | Diagnosis | Defogger indicator | Rear curtain power |
| 13 | GND 1 | Security indicator | x |
| 14 | IGN 1 | Assist seat belt indicator | |
| 15 | ACC | Rain sensor data (LIN) | |
| 16 | - | Front room lamp | |
| 17 | - | x | |
| 18 | HBA (option) | ||
| 19 | - | ||
| 20 | - | ||
| 21 | Defogger switch | ||
| 22 | - | ||
| 23 | Parking brake switch | ||
| 24 | - | ||
| 25 | - | ||
| 26 | GND 2 |
Specifications
Specifications
ItemsSpecificationsRated voltageDC 12VOperating voltageDC 9 ~ 16VOperating temperature-30°C ~ 75°C (-4°F ~ 158°F)Dark current4.5 mA
...
Schematic Diagrams
Circuit Diagram
...
See also:
Rear Glass Defogger Timer Repair procedures
Inspection
While operating the components, check whether the operations are normal as shown in the timing chart.
1.
Once ALT "L" is ON, if the defogger is switched ON, the defogger will stay ON f ...
Front Air Strut Assembly Schematic Diagrams
Circuit Diagram
1.
Front air strut connector
2.
Front air terminal function
TerminalFunction1Variable damper (-)2Variable damper (+)
3.
Circuit diagram ...
Line Pressure Control Solenoid Vale Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com