Hyundai Equus: Smart Key Receiver Repair procedures
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Smart Key System / Smart Key Receiver Repair procedures
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Smart Key System / Smart Key Receiver Repair procedures
| Removal |
| 1. |
Disconnect the negatiev (-) battery terminal. |
| 2. |
Remove the glove box housing.
(Refer to Body - "Glove Box Housing") |
| 3. |
Remove the RF receiver (B) after disconnecting the connector (A) and loosening the mounting bolt.
|
| Installation |
| 1. |
Install the RF receiver after connecting the connector. |
| 2. |
Install the glove box housning. |
| 3. |
Connect the negative (-) battery terminal. |
Smart Key Receiver Components and Components Location
Components
...
Smart Key Diagnostic Repair procedures
Inspection
Self Diagnosis With GDS
Smart key system defects can be quickly diagnosed with the
GDS. GDS operates actuator quickly to monitor, input/output value and
self diagnosis.
The followi ...
See also:
Driver's attention
The driver must be cautious in the below situations for the system may not assist
the driver and may not work properly.
The lane is not visible due to snow, rain, stain, a puddle or many other
...
Snow tires
If you equip your car with snow tires, they should be the same size and have
the same load capacity as the original tires. Snow tires should be installed on
all four wheels; otherwise, poor handli ...
Fuel Pump Motor Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
"Release the residual pressure in fuel line.
(Refer to Fuel Delivery System -""Release Residual Pres ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com