Hyundai Equus: BlueLink Control Switch Components and Components Location

Telemetics Unit (TMU) Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front AVN monitor. (Refer to "Premium AVN System") 3. Remove the MTS unit after loosening the screw and nuts. 4. ...

BlueLink Control Switch Repair procedures

Removal 1. Remove the Electro chromic Inside rear view mirror. (Refer to Electro Chromic Inside Rear View Mirror) Installation 1. Install the Electro chromic Inside rear view mirror. (Refer ...

See also:

Head Up Display ON/OFF
To activate the head up display, press the HUD button. If you press the HUD button again, the head up display will be deactivated. ...

Injector Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance between the injector terminals 1 and 2. 4. Check that the resistance is within t ...

Checking the brake fluid level
Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir cap and adding brake fluid, ...