>
Components |
Hood Latch Release Handle Repair procedures
Replacement
1.
After loosening the mounting screw, then remove the hood latch release handle (A).
2.
Installation is the reverse of removal.
•
Make sure the hood latc ...
Alternator Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the engine cover.
3.
Remove the air cleaner assembly.
(1)
Remove the air duct (A).
(2)
D ...
Suspension mounting bolts
Check the suspension connections for looseness or damage. Retighten to the specified
torque. ...