>

Hyundai Equus: Rear Center Seat Belt Retractor Repair procedures - Rear Seat Belt - Body (Interior and Exterior) - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Rear Center Seat Belt Retractor Repair procedures

Replacement
   
•
When installing the belt, make sure not to damage the retractor.
1.
Remove the rear package tray trim.
(Refer to Interior Trim - "Rear Package Tray Trim")
2.
After loosening the retractor (A) mounting bolt, remove the rear center seat belt (B).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
   
•
Make sure the connector is plugged in properly.
•
Replace any damaged clips.
    Rear Center Seat Belt Retractor Components and Components Location
    Component Location 1. Rear center seat belt retractor ...

    Rear Seat Belt Buckle Components and Components Location
    Component Location (1) [Sedan] 1. Rear seat belt buckle [LH]2. Rear seat belt buckle [RH] [Limousine] 1. Rear seat belt buckle [LH]2. Rear seat belt buckle [RH] ...

    See also:

    Height Sensor Components and Components Location
    Components Front Height Sensor 1. Lever2. Braket3. Braket4. Height sensor5. Road Rear Height Sensor 1. Lever2. Height sensor3. Road4. Braket ...

    Oil Pressure Switch Repair procedures
    Inspection 1. Check the continuity between the terminal and the body with an ohmmeter. If there is no continuity, replace the oil pressure switch. 2. Check the continuity between the terminal ...

    Rear Wheel House Trim Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply pr ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com