>
The LCD display modes can be changed by using the control buttons on the steering wheel.
(1) button : Changing LCD modes
(right to left), or returning to previous position
(2) button : Changing LCD modes (left
to right)
(3) ,
button : Changing items (upper or lower)
(4) OK button : selecting or resetting
❈ For the LCD modes, refer to "LCD Display" in this chapter.
(1) Haptic switch : changing LCD modes or items
(2) OK button : selecting or resetting
(3) RETURN button : returning to previous position
You can adjust the rotating effort of the haptic switch on the "User Settings Mode" of the LCD Display
❈ For more details, refer to "LCD Display" to in this chapter.
Repair procedures
Inspection
Tolerance Compensation
Tolerance compensation compensates for the error margins of
Multi-view video that occur due to the installation tolerance when the
four cameras that comprise ...
Telemetics Unit (TMU) Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front AVN monitor.
(Refer to "Premium AVN System")
3.
Remove the MTS unit after loosening the screw and nuts.
4.
...
Front Strut Assembly Repair procedures
Removal
1.
Remove the front wheel and tire (A) from front hub .
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
•
Be careful not to damage ...