>

Hyundai Equus: ECS (Electronic Controlled Suspension) malfunction warning message - Electronic controlled suspension (ECS) (If equipped) - Driving your vehicle - Hyundai Equus 2009-2024 Owners ManualHyundai Equus: ECS (Electronic Controlled Suspension) malfunction warning message

If ECS malfunction warning message comes on while driving, ECS is not working


If ECS malfunction warning message comes on while driving, ECS is not working properly.

We recommend that the system be checked by an authorized EQUUS dealer.

✽ NOTICE

  • If the battery is discharged or if you push the SPORT button or the vehicle height control button repeatedly in a short time, the ECS malfunction indicator may illuminate to protect the system.
  • When the height is adjusted repeatedly, the height may not temporarily be adjusted for the compressor overheats. This is to prevent damage to related parts.

CAUTION


CAUTION

If the ECS malfunction message illuminates when there is no air in the suspension, the vehicle height will be very low, so do not drive the vehicle to protect it from the projections on the surface of the ground. Take your vehicle to an authorized EQUUS dealer by towing the vehicle and have the system checked. You should tow the vehicle as shown in the picture.

When you load the vehicle onto the tow truck, the loading angle(1) should be


When you load the vehicle onto the tow truck, the loading angle(1) should be smaller than 6°.

    To control the vehicle height
    Push the vehicle height control button to select the HIGH mode that makes the vehicle higher than the NORMAL mode and the indicator light on the vehicle height control button will illuminate. It i ...

    Advanced smart cruise control system (If equipped)
    (1) CRUISE indicator (2) SET indicator (3) Set speed (4) Vehicle-to-vehicle distance The smart cruise control system allows you to program the vehicle to maintain a set speed so long as it is ...

    See also:

    Thermostat Repair procedures
    Removal and Installation 1. Disconnect the negative terminal (A) from the battery. Tightening torque : 4.0~6.0N.m (0.4~0.6kgf.m, 3.0~4.4lb-ft) 2. Remove the air duct, air intak hose and ...

    Knock Sensor (KS) Schematic Diagrams
    Circuit Diagram ...

    Adaptive Front Lighting System Repair procedures
    Removal AFLS Unit 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing (A). (Refer to the Body group - "Crash pad") 3. Disconnect the glove box housing connect ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com