>
Removal |
1. |
Remove the floor console upper tray.
(Refer to Body - "Floor Console Assembly") |
2. |
Remove the center fascia lower tray.
(Refer to Body - "Center fascia pannel") |
3. |
Remove the multimedia jcak (A) after releasing the fixed hooks (B). |
Installation |
1. |
Connect the multimedia jack connector. |
2. |
Install the multimedia jack. |
3. |
Install the center facia lower tray.
|
ON/OFF Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
ON/OFF Solenoid Valve Schematic Diagrams
Circuit Diagram
...
GVWR (Gross vehicle weight rating)
This is the maximum allowable weight of the fully loaded vehicle (including all
options, equipment, passengers and cargo). The GVWR is shown on the certification
label located on the driver’s door ...