>
Specifications |
Control Pressure kpa (kgf/cmx, psi) | 0 ~ 2108.42 (0 ~ 21.5, 0 ~ 305.80) |
Current value(mA) | 0~1100 |
Internal resistance(x) | 5.0~5.6 |
Air Spring Repair procedures
Removal
•
Before replacing the relevant parts, use GDS equipment to fully discharge the air from the relevant parts.
(Refer to Air Suspension System - "Repair procedures ( ...
Drive belts
Inspect all drive belts for evidence of cuts, cracks, excessive wear or oil saturation
and replace if necessary. ...
Intake Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 ...