>
Hyundai Equus Manuals

Hyundai Equus: Troubleshooting - Indicators And Gauges - Body Electrical System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Troubleshooting

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body Electrical System / Indicators And Gauges / Troubleshooting

Troubleshooting
Error Item
Failure symptom
Inspection items
Detailed inspections
Relevant Parts/
Components
Screen display
TFT-LCD screen does not turn on
1.
Connector attachments
2.
Components
1.
Check the connector attachments
2.
Check B+, IGN and GND wiring
3.
Check the components
Connectors, wiring, fuses, dashboard
Warning light
Airbag warning lamp malfunction
1.
Connector attachments
2.
C-CAN
3.
Components
1.
Check airbag + signal (connectors)
2.
Check C-CAN (ACU4) signal
3.
Check the FPC attachment inside the dashboard
ACU Connectors, wiring, fuses, dashboard
Mode conversion
Integrated driving mode malfunction
1.
Connector attachments
2.
Switch
3.
Components
1.
Check the switch input (connector)
2.
Check the switch signal input
(disconnection or shorting)
3.
Check conversion with dashboard component
Switch connector, wiring dashboard
Illumination
Interior light brightness cannot be controlled.
1.
Connector attachments
2.
Switch
3.
Components
1.
Check if the light switch's input signal reaches the connector
2.
Check ILL- and DETENT signals
3.
Check the TAIL+ signal input
Switch connector, wiring dashboard
Warning Sound
No dashboard alarm
1.
Connector attachments
2.
Car speakers
3.
Components
1.
Check the speaker output connector
2.
Check the car speakers
Speaker connectors, wiring dashboard
Fuel indicator
Faulty fuel gauge indication
1.
Connector attachments
2.
Fuel sender
3.
Components
1.
Check fuel input and GND connectors
(open, short or input resistance values)
2.
Check fuel sender
Fuel sender connector, wiring dashboard

    Instrument Cluster Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the cluster fascia panel after loosening the screws. (Refer to Body - "Cluster Fascia Panel") 3. Remove the cluster asse ...

    Power Door Locks
    ...

    See also:

    Air Quality Sensor (AQS) Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Connect the GDS. 3. Check the output voltage of AQS between terminal 2 and 3. 1. DC 12V( Ignition)2. Sensor ground3. AQS signal Specif ...

    Front Seat Shield Inner Cover Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply prote ...

    Aux, USB and iPod® port
    If your vehicle has an aux and/or USB(universal serial bus) port or iPod® port, you can use an aux port to connect audio devices and a USB port to plug in a USB, and an iPod® port to plug in a ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com