Hyundai Equus: Suspension mounting bolts

Exhaust pipe and muffler

Visually inspect the exhaust pipes, muffler and hangers for cracks, deterioration, or damage. Start the engine and listen carefully for any exhaust gas leakage. Tighten connections or replace part ...

Steering gear box, linkage & boots/lower arm ball joint

With the vehicle stopped and engine off, check for excessive free-play in the steering wheel. Check the linkage for bends or damage. Check the dust boots and ball joints for deterioration, cracks ...

See also:

Stabilizer Bar Repair procedures
Removal [Front Stabilizer Bar] 1. Removal the front wheel & tire. Tightening torque : 90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft) 2. Disconnect the stabilizer link (A) ...

Removable towing hook (if equipped)
1.Open the trunk, and remove the towing hook from the tool case. 2.Remove the hole cover by pressing the lower part of the cover on the front or rear bumper. 3.Install the towing hook by turning ...

Camshaft Position Sensor (CMPS) Description and Operation
Description Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element. It is related with Crankshaft Position Sensor (CKPS) and detects the pisto ...