>
Replacement |
1. |
Open the glass fully. |
2. |
Disconnect the deflector link (A) and spring (B) from the frame, and then remove the deflector (C). |
3. |
Install in the reverse order of removal. |
Front Impact Sensor (FIS) Description and Operation
Description
The front impact sensor (FIS) is installed in the Front End
Module (FEM). They are remote sensors that detect acceleration due to a
collision at its mounting location. The primary p ...
Rear Remote Controller (RRC) Repair procedures
Removal
Rear Keyboard Unit
1.
Remove the rear seat armrest upper cover.
(Refer to Seat Electrical System - "Seat Heater Switch")
2.
Disconnect the connectors (A) from armrest upper cover.
...
Rain Sensor Repair procedures
Removal
The dust or foreign substance on the rain sensor have a bad
effect upon the rain sensor capability,so protect the sensor surface
with protection cover until instal ...