Hyundai Equus: Fuel Pressure Sensor (FPS) Troubleshooting
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Engine Control/Fuel System / Fuel Delivery System / Fuel Pressure Sensor (FPS) Troubleshooting
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Engine Control/Fuel System / Fuel Delivery System / Fuel Pressure Sensor (FPS) Troubleshooting
| Fail-Safe Mode |
| Item | Fail-Safe |
| Duty (%) | 85 |
If the fuel pressure sensor malfunctions, it enters fail safe
mode. This means that the fuel pressure rises to match the increasing
value of the current level and the pressure in the low pressure fuel
line remains static despite the rising fuel pressure. |
Fuel Pressure Sensor (FPS) Schematic Diagrams
Circuit Diagram
...
Fuel Pressure Sensor (FPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Check the output voltage of fuel pressure sensor (FPS).
Specification: Refer to “Specification”
Removal
1.
Tu ...
See also:
Upper Arm Repair procedures
Removal
[Front Upper arm]
1.
Removal the front wheel & tire.
Tightening torque :
90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft)
2.
Removal the air strut assembly.
(Refer ...
Theft-alarm system
This system helps to protect your vehicle and valuables. The horn will sound
and the hazard warning lights will blink continuously if any of the following occurs:
- A door is opened without using t ...
Front LCD monitor Repair procedures
Removal
Take care not to scratch the crash pad and related parts.
1.
Disconnect the negative (-) battery terminal.
2.
Remove the center fascia upper panel.
(Refer to ...
Categories
Hyundai Equus Manuals
2011-2026 Copyright www.heqmanual.com