>
Description |
Rear Wheel Speed Sensor Repair procedures
Removal
1.
Remove the rear wheel speed sensor mounting bolt.
Tightening torque:
6.9 ~ 10.8 Nm (0.7 ~ 1.1 kgf.m, 5.1~ 8.0 lb-ft)
2.
Remove the rear wheel guard.
3.
Disconnect the rea ...
Power Steering Hose Repair procedures
Replacement
-
Refer to the components illustration during removal or installation.
-
When installing, be sure to connect between hose to tube using a clamp as shown in the illustration.
- ...
Heater Unit Components and Components Location
Component Location
Components
1. Heater Case (Left)2. Vent Door (Left)3. Temperature Door (Left)4. Floor Door (Left)5. Console Temperature Control Actuator (A) 6. Console Temperature Lever7. Con ...