>

Hyundai Equus: Specifications - General Information - Emission Control System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Specifications

Specifications
Purge Control Solenoid Valve (PCSV)
x Specification
Item
Specification
Coil Resistance (x)
14.0 ~ 18.0 [20°C(68°F)]

Fuel Tank Pressure Sensor (FTPS)
x Type: Piezo-Resistive Pressure Sensor
x Specification
Pressure (kPa)
Output Voltage (V)
-6.67
0.5
0
2.5
+6.67
4.5

Canister Close Valve (CCV)
x Specification
Item
Specification
Coil Resistance (x)
23.0 ~ 26.0 [20°C(68°F)]

Tightening Torques
Item
kgf.m
N.m
lb-ft
Positive Crankcase Ventilation (PCV) valve installation
0.19 ~ 0.29
0.019 ~ 0.029
0.014 ~ 0.021
Fuel tank pressure sensor installation bolt
0.4 ~ 0.6
3.9 ~ 5.9
2.9 ~ 4.3
Canister close valve installation bolt
0.4 ~ 0.6
3.9 ~ 5.9
2.9 ~ 4.3
Canister installation bolt
0.4 ~ 0.6
3.9 ~ 5.9
2.9 ~ 4.3
Canister cover installation bolt
0.8 ~ 1.2
7.8 ~ 11.8
5.8 ~ 8.7
Ventilation hose connector assembly installation bolt
0.4 ~ 0.6
3.9 ~ 5.9
2.9 ~ 4.3
Canister protector installation bolt
2.0 ~ 3.0
19.6 ~ 29.4
14.5 ~ 21.7

    Description and Operation
    Description Emissions Control System consists of three major systems. • Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system recycles gas ...

    Troubleshooting
    Troubleshooting SymptomSuspect areaEngine will not start or stuggle to startVapor hose damaged or disconnectedEngine stuggle to startMalfunction of the Purge Control Solenoid ValveRough idle or e ...

    See also:

    Presure Switch Repair procedures
    Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

    Oil Pressure Switch Repair procedures
    Inspection 1. Check the continuity between the terminal and the body with an ohmmeter. If there is no continuity, replace the oil pressure switch. 2. Check the continuity between the terminal ...

    Repair procedures
    Fuel Pressure Test 1. Release the residual pressure in fuel line. (Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line")     When removing the fuel pump re ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com