>

Hyundai Equus: Specifications - Blind Spot Detecation system - Body Electrical System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Specifications

Specifications
Items
Specification
Rated voltage
DC 12V
Operating voltage
9V ~ 16V
Operating speed
15x/h ~ 250x/h
Sensible distance
70m (Sedan)
Curvature radius
Start : More than 100m
Stop : Less than 70m
Frequency
24.125 GHz.
Numbers
2EA : Master(RH) , Slave(LH)

    Blind Spot Detecation system
    ...

    Components and Components Location
    Components 1. BSD (Blind Spot Detection) switch module (ON/OFF switch & state LED)2. Speaker (Built in the cluster)3. Head Up Display (HUD)4. BSD warning lamp (Built in the outside mirror)5. ...

    See also:

    Headlight, position light, turn signal light, side marker light and front fog light bulb replacement
    (1) Position light (2) Headlight (High) (3) Headlight (Low) (4) Front side marker light (5) Front turn signal light (6) Front fog light 1. Open the hood. 2. Disconnect the negative battery ...

    Front Door Inside Handle Repair procedures
    Replacement 1. Remove the front door trim. (Refer to Front Door - "Front Door Trim") 2. Disconnect the front door inside handle lamp connector (A). 3. After loosening the mounting screws ...

    Solenoid Valve Components and Components Location
    Components 1. Connected to air tube2. Bracket3. Connector ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com