>

Hyundai Equus: Rear Center Seat Belt Retractor Repair procedures - Rear Seat Belt - Body (Interior and Exterior) - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Rear Center Seat Belt Retractor Repair procedures

Replacement
   
•
When installing the belt, make sure not to damage the retractor.
1.
Remove the rear package tray trim.
(Refer to Interior Trim - "Rear Package Tray Trim")
2.
After loosening the retractor (A) mounting bolt, remove the rear center seat belt (B).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
   
•
Make sure the connector is plugged in properly.
•
Replace any damaged clips.
    Rear Center Seat Belt Retractor Components and Components Location
    Component Location 1. Rear center seat belt retractor ...

    Rear Seat Belt Buckle Components and Components Location
    Component Location (1) [Sedan] 1. Rear seat belt buckle [LH]2. Rear seat belt buckle [RH] [Limousine] 1. Rear seat belt buckle [LH]2. Rear seat belt buckle [RH] ...

    See also:

    Windshield Deicer Switch Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or plastic panel remover, remove the cluster fascia upper panel (A). 3. Using a screwdriver or plastic panel ...

    High mounted stop light
    1. Remove the rear seat 5 Seater 1.Disconnect the negative battery cable. 2.Remove the rear seat cushion. 3.Loosen the mounting bolts, then remove the rear seat back. 4.Disconnect the conne ...

    Blind spot detection system (BSD) (If equipped)
    The BSD (Blind spot detection) system uses a radar sensor to alert the driver while driving. It senses the rear side territory of the vehicle and provides information to the driver. (1) BSD (B ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com