>
Circuit Diagram |
Line Pressure Control Solenoid Vale Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Light bulbs
WARNING - Working on the lights
Prior to working on the light, firmly apply the parking brake, ensure that
the ignition switch is turned to the LOCK position and turn off the lights to avoid
sudd ...
Antenna
Glass antenna
When the radio power switch is turned on while the Engine Start/Stop Button is
in either the "ON" or "ACC" position, your car will receive both AM and FM broad ...