>

Hyundai Equus: Positive Crankcase Ventilation (PCV) Valve Repair procedures - Crankcase Emission Control System - Emission Control System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Positive Crankcase Ventilation (PCV) Valve Repair procedures

Removal
1.
Disconnect the vapor hose (A).
2.
Remove the PCV valve (B).

Inspection
1.
Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger moves.

   
If the plunger does not move (PCV valve is clogged), clean or replace the valve.
Installation
1.
Installation is reverse of removal.

PCV Valve installation :
0.019 ~ 0.021 N.m (0.19 ~ 0.29 kgf.m, 0.014 ~ 0.021 lb-ft)

    Positive Crankcase Ventilation (PCV) Valve Description and Operation
    Operation Principle ...

    Evaporative Emission Control System
    ...

    See also:

    Crash Pad Lower Panel Components and Components Location
    Component Location 1. Crash pad lower panel ...

    Description and Operation
    OBD-II review 1. Overview The California Air Resources Board (CARB) began regulation of On Board Diagnostics (OBD) for vehicles sold in california beginning with the 1988 model year. The first ...

    Electronic Active Headrest Repair procedures
    Inspection 1. How to reassemble the Headrest which was released by rear (or front) Impact. 2. How to unlock the trigger in case of trigger is locked. (1) Normally, the trigger position is un ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com