>
Mode Control Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the mode control actuator connector.
3.
Verify that the mode control actuator operates to the defrost mode when connecting 12V to ...
ETC (Electronic Throttle Control) System Repair procedures
Inspection
Throttle Position Sensor (TPS)
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T.
Throttle ...
Specifications
Specifications
Fuel Delivery System
ItemsSpecificationFuel TankCapacity77 lit. (87.4 U.S.gal., 81.4 U.S.qt., 67.8 Imp.qt.)Fuel FilterTypePaper typeFuel PressureLow Pressure Fuel Line343.2 ~ 59 ...