>

Hyundai Equus: Middle Speed Sensor Repair procedures - Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Middle Speed Sensor Repair procedures

Inspection
1.
Check signal waveform of middle speed sensor using the GDS.

Specification: Refer to "Signal Wave Form" section.

    Middle Speed Sensor Schematic Diagrams
    Circuit Diagram ...

    Presure Switch Description and Operation
    Description The oil pressure switch detects any abnormal hydraulic pressure to the 35R clutch in the N range. ...

    See also:

    Description and Operation
    Description In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to the ve ...

    Crankshaft Position Sensor (CKPS) Specifications
    Specification ItemSpecificationCoil Resistance (x)774 ~ 946 [20°C (68°F)]Air cap(mm)0.5 ~ 1.5 ...

    Emergency Fastening Device (EFD) Repair procedures
    Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front seat assembly. (Refer to Body - "Front Seat Assembly") 3. ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com