Hyundai Equus: Line Pressure Control Solenoid Vale Specifications
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Line Pressure Control Solenoid Vale Specifications
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Line Pressure Control Solenoid Vale Specifications
| Specifications |
Line Pressure Control VFS
x Control type : Normal high type
| Control Pressure kpa (kgf/cmx, psi) | 0~500.14 (0~5.1,0~72.54) |
| Current value(mA) | 0~850 |
| Internal resistance(x) | 4.8~5.4 |
Line Pressure Control Solenoid Vale Description and Operation
Description
Line presure control solenoid valve is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic
pressure inside the line presure . ...
Line Pressure Control Solenoid Vale Schematic Diagrams
Circuit Diagram
...
See also:
Components and Components Location
Components
1. ESP control module (HECU)2. Steering angle sensor3. Rear wheel speed sensor4. Sensor cluster (Yaw rate & Lateral)5. Front wheel speed sensor
...
Auto Defogging Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the auto defogging connector.
3.
Verify that the auto defogging actuator operates to the open
position when connecting 12V to ...
Power Trunk (if equipped)
(1) Power Trunk Main Control button
(2) Power Trunk Open button
(3) Power Trunk Close button
(4) Power Trunk Lock button
To open:
1. Make sure the shift lever is in P(Park).
2. Then do one o ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com