>
Hyundai Equus: Injector Troubleshooting
| Signal Waveform |

Injector Specifications
Injector Schematic DiagramsSpliter Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the floor console.
(Refer to Body - "Floor Console Assembly")
3.
Remove the spliter unit (A) after disconnecting the con ...
Auto Light Sensor Repair procedures
Inspection
In the state of IGN1 ON, when the multi function switch
module detects auto light switch on, tail lamp relay output and head
lamp low relay output are controlled according to auto li ...
Thermostat Repair procedures
Removal and Installation
1.
Disconnect the negative terminal (A) from the battery.
Tightening torque :
4.0~6.0N.m (0.4~0.6kgf.m, 3.0~4.4lb-ft)
2.
Remove the air duct, air intak hose and ...