>

Hyundai Equus: Hood Seal Weatherstrip Repair procedures - Hood - Body (Interior and Exterior) - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Hood Seal Weatherstrip Repair procedures

Replacement
1.
Detach the clips, then remove the hood seal weatherstrip (A).
   
•
Be careful not to scratch the hood seal weatherstrip.

2.
Installation is the reverse of removal.
   
•
Replace any damaged clips.
    Hood Insulator Pad Repair procedures
    Replacement 1. Using a clip remover, detach the clips, and remove the hood insulator pad (A).     • Be careful not to scratch the hood panel. 2. Installation is th ...

    Hood Weatherstrip Repair procedures
    Replacement 1. Remove the glue on end of both sides before removing the hood weatherstrip (A).     • Be careful not to scratch the hood weatherstrip. 2. Installat ...

    See also:

    Air Filter Description and Operation
    Description The air filter removes any impurities in the intake air. Composition This component consists of an air filter, silencer, bracket, and more. Function of air filter • Eliminates ...

    Accelerator Position Sensor (APS) Repair procedures
    Inspection 1. Connect a scantool on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output voltage of the APS 1 and 2 at C.T and W.O.T. Specification: Refe ...

    Auto Defogging Sensor Repair procedures
    Inspection To inspect and diagnose the sensor, refer to Self-Diagnosis procedure and DTC guide. Replacement 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remov ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com