Hyundai Equus: Head Up Display Switch Repair procedures
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Head Up Display System / Head Up Display Switch Repair procedures
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Head Up Display System / Head Up Display Switch Repair procedures
| Removal |
| 1. |
Disconnect the negative (-) battery. |
| 2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel") |
| 3. |
Remove the crash pad lower panel and then push the head up display switch (A) to remove it.
|
| Installation |
| 1. |
Install the head up display switch after connecting the connector. |
| 2. |
Install the crash pad lower panel. |
| Inspection |
| 1. |
Remove the HUD switch.
|
| 2. |
Operate the HUD switch, then check for continuity between terminals of HUD switch connector.
|
Troubleshooting
Troubleshooting
Category Error symptoms inspection item Detailed inspection item Related partsLighting
•
HUD not working
•
Lighting brightness not automatically controlled (no diff ...
See also:
Fuel Pump Control Module (FPCM) Description and Operation
Description
The fuel pump control module (FPCM) is installed on the right
side of the trunk compartment. It controls the BLDC (Brushless DC)
motor mounted inside the variable low pressure fuel ...
Repair procedures
Inspection
Relex Power Seat Module (RPSM) For Passenger & Rear
Glossary
-
RPSM : Relax Power Seat Module
-
Combined RELAX SW : Combined RELAX SWITCH
-
Combined WALK IN SW : Combin ...
Rear Door Trim Components and Components Location
Component Location
1. Rear door trim
...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com