Hyundai Equus: Fuel Pressure Sensor (FPS) Specifications
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Engine Control/Fuel System / Fuel Delivery System / Fuel Pressure Sensor (FPS) Specifications
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Engine Control/Fuel System / Fuel Delivery System / Fuel Pressure Sensor (FPS) Specifications
| Specification |
| Pressure(kPa) | Output Voltage(V) |
| 50 | 0.3 |
| 600 | 2.5 |
| 1100 | 4.5 |
Fuel Pressure Sensor (FPS) Description and Operation
Description
The fuel pressure sensor (FPS) is installed on top of the low
pressure fuel pump and measures the pressure of the low pressure fuel
line. Based on the current fuel pressure and the ...
Fuel Pressure Sensor (FPS) Schematic Diagrams
Circuit Diagram
...
See also:
Transmission Oil Temperature Sensor Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Electronic Active Headrest Components and Components Location
Component location
1. Active headrest connector2. Elevator system connector3. Impact sensor4. Electronic active headrest
...
Refrigerant label
The refrigerant label is located on the underside of the hood.
The label contains the following information:
Type of refrigerant
Amount of refrigerant
...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com