Hyundai Equus: Side Impact Sensor (SIS) Components and Components Location

Side Impact Sensor (SIS) Description and Operation

Description The Side Impact Sensor (SIS) system consists of two kinds of side impact sensor which are installed at each center of the front door module (left and right) and two rear sensors whi ...

Side Impact Sensor (SIS) Repair procedures

Removal     • Removal of the airbag must be performed according to the precautions/procedures described previously. • Before disconnecting the side impact sensor conn ...

See also:

Blind spot detection system (BSD) (If equipped)
The BSD (Blind spot detection) system uses a radar sensor to alert the driver while driving. It senses the rear side territory of the vehicle and provides information to the driver. (1) BSD (B ...

Sunroof Motor Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the overhead console then remove the sun roof motor mounting screws (3EA). And then remove the sunroof motor (A) after ...

CVVT Oil Control Valve (OCV) Description and Operation
Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by ...