>
Hyundai Equus: Specifications
| Specifications |
| Item | Specification | |||
| Steering Gear | Type | Rack & Pinion | ||
| Rack stroke | Manual | 144mm | ||
| AIR | 136mm | |||
| Power Steering Motor | Type | BLDC (WET type) | ||
| Voltage | 13.5V | |||
| Steering angle (Max.) | Inner | R17 | Manual | 42.67°±1°30’ |
| AIR | 41.59°±1°30’ | |||
| R18 | Manual | 42.66°±1°30’ | ||
| AIR | 41.58°±1°30’ | |||
| Outer | R17 | Manual | 34.06° | |
| AIR | 33.45° | |||
| R18 | Manual | 33.94° | ||
| AIR | 33.33° | |||
| Power steering oil | PENTOSIN CHF202 | |||
| Item | Tightening torque | ||
| Nm | kgf.m | lb-ft | |
| Hub nuts | 90.0 ~ 110.0 | 9.0 ~ 11.0 | 65.0 ~ 80.0 |
| Steering column mounting bolts and nuts | 32.0 ~ 37.0 | 3.3 ~ 3.8 | 24.0 ~ 27.4 |
| Bolt connecting steering column to universal joint | 32.0 ~ 37.0 | 3.3 ~ 3.8 | 24.0 ~ 27.4 |
| Tie rod end to front axle | 88.0 ~ 108.0 | 9.0~11.0 | 65.0 ~ 80.0 |
| Steering gear box to bracket | 20.0 ~ 30.0 | 2.0 ~ 3.0 | 14.0 ~ 21.0 |
| Steering gear box mounting bolts - RH | 85.0 ~ 110.0 | 8.5 ~ 11.0 | 62.0 ~ 80.0 |
| Steering gear box mounting bolts –LH | 110.0 ~ 130.0 | 11.0 ~ 13.0 | 80.0 ~ 94.0 |
Special Service ToolsSmooth cornering
Avoid braking or gear changing in corners, especially when roads are wet. Ideally,
corners should always be taken under gentle acceleration. If you follow these suggestions,
tire wear will be ...
Limousine Interior
Interior A
Front inner pillar tooling hole (O9)Cowl cross bar mounting hole (O11)Front door checker mounting hole (O11)Side sill inner reinforcement tooling hole (O7)Seat belt height adjuster upp ...
Repair procedures
Inspection
[System Inspection]
1.
Disconnect the vapor hose from the throttle body and connect a vacuum pump to the nipple on the throttle body.
2.
Check the following points with applying ...