Hyundai Equus: Air Spring Components and Components Location

Rear Variable Damper Repair procedures

Removal 1. Remove the rear wheel & tire. Tightening torque : 90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft) 2. Disconnect the rear shock absorber (A) from the rear axle by loo ...

Air Spring Description and Operation

Description Because of the design layout, the air spring and the shock absorber (damper) is separated. The average (target) pressure of rear air spring for normal operation is around 8.5 bar. ...

See also:

Fuel Pump Control Module (FPCM) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Check the output voltage of fuel pressure sensor (FPS). Specification: Refer to “Specification� ...

Specifications
Specification Air Conditioner ItemSpecificationCompressorType7VSX18Oil type & CapacityPAG 120± 10cc (4.1±0.3oz.)Pulley typeAround rubber damperDisplacement180cc/revCondenserHeat rejection18, ...

ON/OFF Solenoid Valve Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...