>

Hyundai Equus: Trailing Arm Repair procedures - Rear Suspension System - Suspension System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Trailing Arm Repair procedures

Removal
1.
Remove the rear wheel and tire (A) from rear hub .

Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

   
•
Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).

2.
Loosen the bolt & lock nut (A).

Tightening torque:
100.0 ~ 120.0 N.m (10.0 ~ 12.0 kgf.m, 72.0 ~ 87.0 lb-ft)

3.
Disconnect the trailing arm (B) from the rear axle by loosening the bolt & nut (A).

Tightening torque:
110.0 ~ 120.0 N.m (11.0 ~ 12.0 kgf.m, 65.0 ~ 87.0 lb-ft)

4.
Install in the reverse order of removal.
5.
Check the alignment.
(Refer to Tires/Wheels - "Alignment")
Inspection
1.
Check the bushing for wear and deterioration.
2.
Check the trailing arm deformation.
3.
Check the all bolts.
    Rear Assist Arm Repair procedures
    Removal 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)     • Be careful not to damage ...

    Rear Lower Arm Repair procedures
    Removal 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)     • Be careful not to damage ...

    See also:

    Ignition Coil Description and Operation
    Description An ignition coil is an induction coil in an engine's ignition system which transforms the battery's low voltage to the high voltage needed to create an electric spark in the spark p ...

    Line Pressure Control Solenoid Vale Repair procedures
    Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

    Multi-view Camera Unit Components and Components Location
    Components ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com