Hyundai Equus: Fuel Tank Pressure Sensor (FTPS) Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Engine Control/Fuel System / Engine Control System / Fuel Tank Pressure Sensor (FTPS) Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Engine Control/Fuel System / Engine Control System / Fuel Tank Pressure Sensor (FTPS) Description and Operation
| Description |
Fuel Tank Pressure Sensor (FTPS) is a component of the
evaporative emission control system and is installed on the fuel tank,
the fuel pump, or the canister. It checks the purge control solenoid
valve operation and detects a leakage of the system.
Rail Pressure Sensor (RPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine speed.
ConditionOutput Voltage (V)Idle Approx. 1.21, ...
Fuel Tank Pressure Sensor (FTPS) Specifications
Specification
Pressure [kPa (kgf/cmx, in H2O)Output Voltage (V)-6.67 (-0.068, -26.8)0.502.5+6.67 (0.068, 26.8)4.5
...
See also:
Power steering pump, belt and hoses
Check the power steering pump and hoses for leakage and damage. Replace any damaged
or leaking parts immediately. Inspect the power steering belt (or drive belt) for
evidence of cuts, cracks, exce ...
Yaw-rate and Lateral G Sensor Repair procedures
Replacement
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable
2.
Remove the floor console.
(Refer to Body - "Console")
3.
Disconnect the yaw rate & lateral G s ...
Temperature Control Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the temperature control actuator connector.
3.
Verify that the temperature control actuator operates to the
warm (Driver's side) ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com