>

Hyundai Equus: Camshaft Position Sensor (CMPS) Specifications - Engine Control System - Engine Control/Fuel System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Camshaft Position Sensor (CMPS) Specifications

Specification
Item
Specification
Output Voltage (V)
High : 5.0V
Low : 0.7V
Air Gap (mm)
0.2 ~ 2.0

    Camshaft Position Sensor (CMPS) Description and Operation
    Description Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element. It is related with Crankshaft Position Sensor (CKPS) and detects the pisto ...

    Camshaft Position Sensor (CMPS) Troubleshooting
    Signal Waveform This example shows a typical Crankshaft Position Sensor (CKPS) and Camshaft Position Sensor (CMPS) waveform at idle. ...

    See also:

    Engine compartment fuse replacement
    1. Turn the ignition switch and all other switches off. 2. Remove the fuse panel cover by pressing the tab and pulling up. 3. Check the removed fuse; replace it if it is blown. To remove or insert ...

    Power Window Switch Repair procedures
    Inspection Driver Power Window Switch 1. When checking the driver power window switch, select a vehicle type and "IPM" menu. 2. Select "DDM (Driver Door Module)". 3. Select option "Input/ ...

    Front wiper deicer
    If your vehicle is equipped with the front wiper deicer, it will be operating at the same time you operate the rear window defroster. ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com