Hyundai Equus: Intake Air Temperature Sensor (IATS) Specifications
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Engine Control/Fuel System / Engine Control System / Intake Air Temperature Sensor (IATS) Specifications
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Engine Control/Fuel System / Engine Control System / Intake Air Temperature Sensor (IATS) Specifications
| Specification |
| Temperature | Resistance (kx) | |
| °C | °F | |
| -40 | -40 | 40.93 ~ 48.35 |
| -20 | -4 | 13.89 ~ 16.03 |
| 0 | 32 | 5.38 ~ 6.09 |
| 10 | 50 | 3.48 ~ 3.90 |
| 20 | 68 | 2.31 ~ 2.57 |
| 40 | 104 | 1.08 ~ 1.21 |
| 60 | 140 | 0.54 ~ 0.66 |
| 80 | 176 | 0.29 ~ 0.34 |
Intake Air Temperature Sensor (IATS) Description and Operation
Description
Intake Air Temperature Sensor (IATS) is included inside
Manifold Absolute Pressure Sensor and detects the intake air
temperature.
To calculate precise air quantity, correction of t ...
Intake Air Temperature Sensor (IATS) Schematic Diagrams
Circuit Diagram
...
See also:
6 Speed Clutch Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Blind Spot Detection Indicator Repair procedures
Removal
Blind Spot Detection Warnig Indicator
1.
Disconnect the negative (-) battery terminal.
2.
Remove the mirro (A).
Installation
Blind Spot Detection Warnig Indicator
1.
Install the ...
Automatic Transmission Repair procedures
Removal
1.
Disconnect (-) terminal from the battery.
The battery is placed right side of the temporary tire in the trunk.
2.
Remove the under cover (A).
3.
Remove ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com