>

Hyundai Equus: Manifold Absolute Pressure Sensor (MAPS) Specifications - Engine Control System - Engine Control/Fuel System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Manifold Absolute Pressure Sensor (MAPS) Specifications

Specification
Pressure
[kPa (kgf/cmx, psi)]
Output Voltage (V)
20.0 (0.20, 2.9)
0.79
46.7 (0.47, 6.77)
1.84
101.3 (1.03, 14.7)
4.0

    Manifold Absolute Pressure Sensor (MAPS) Description and Operation
    Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog si ...

    Manifold Absolute Pressure Sensor (MAPS) Schematic Diagrams
    Circuit Diagram ...

    See also:

    Power Seat Motor Repair procedures
    Inspection Slide Motor Limit Switch 1. Disconnect the limit switch (A) and operate the limit switch. 2. Check for continuity between the terminals. 3. Make sure that the seat operation is ...

    Camshaft Position Sensor (CMPS) Repair procedures
    Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Formâ€� Removal     • DON’T remove the camshaft pos ...

    Indicator Lights
    Electronic Stability Control (ESC) Indicator Light This indicator light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position.It illuminates for approx ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com