>

Hyundai Equus: Positive Crankcase Ventilation (PCV) Valve Repair procedures - Crankcase Emission Control System - Emission Control System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Positive Crankcase Ventilation (PCV) Valve Repair procedures

Removal
1.
Disconnect the vapor hose (A).
2.
Remove the PCV valve (B).

Inspection
1.
Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger moves.

   
If the plunger does not move (PCV valve is clogged), clean or replace the valve.
Installation
1.
Installation is reverse of removal.

PCV Valve installation :
0.019 ~ 0.021 N.m (0.19 ~ 0.29 kgf.m, 0.014 ~ 0.021 lb-ft)

    Positive Crankcase Ventilation (PCV) Valve Description and Operation
    Operation Principle ...

    Evaporative Emission Control System
    ...

    See also:

    Steering Wheel Remote Controller (SWRC) Description and Operation
    Description 1. Steering Wheel Remote Controller (SWRC) (1) Main features ItemDescriptionInstallation location Located on the driver side handle (CAN Module is embedded in the audio switch on ...

    Engine And Transmission Assembly Repair procedures
    Removal     • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the connector portion. ...

    Propeller Shaft Repair procedures
    Inspection CV Joint and Boots 1. Shift the transaxle to Neutral. 2. Raise the vehicle off the ground, and support it with safety stands in the proper locations. 3. Check the center beari ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com