>

Hyundai Equus: Description and Operation - General Information - Emission Control System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Description and Operation

Description
Emissions Control System consists of three major systems.
Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system recycles gas back into the intake manifold (Closed Crankcase Ventilation Type).
Evaporative Emission Control System prevents evaporative gas from releasing into the atmosphere. This system burns gas at appropriate engine operating condition after gathering it in the canister.
Exhaust Emission Control System converts the three pollutants [hydrocarbons (HC), carbon monoxide (CO), and oxides of nitrogen (NOx)] into harmless substances by using the 3-way catalytic converter.
    General Information
    ...

    Specifications
    Specifications Purge Control Solenoid Valve (PCSV) x Specification ItemSpecificationCoil Resistance (x)14.0 ~ 18.0 [20°C(68°F)] Fuel Tank Pressure Sensor (FTPS) x Type: Piezo-Resistive ...

    See also:

    Sub Fuel Sender Repair procedures
    Removal 1. Release the residual pressure in fuel line. (Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line") 2. Folding the rear seat cushion. 3. Remove the fuel pump ...

    Fuel Pump Control Module (FPCM) Repair procedures
    Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Check the output voltage of fuel pressure sensor (FPS). Specification: Refer to “Specification” ...

    Start/Stop Button Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad center panel. (Refer to Body - "Crash Pad Center Panel") 3. Remove the start/stop button connector (A) fro ...

    Categories

    Hyundai Equus Manuals

    2011-2026 Copyright www.heqmanual.com