Hyundai Equus: Battery Sensor Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Engine Electrical System / Charging System / Battery Sensor Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Engine Electrical System / Charging System / Battery Sensor Description and Operation
| Description |
Vehicles have many control units that use more electricity.
These units control their own system based on information from diverse
sensors. It is important to have a stable power supply as there diverse
sensors giving a variety of information. Battery sensor is mounted on
battery (-) terminal. It transmits battery voltage, current, temperature
information to ECM. ECM controls generating voltage by duty cycle
based on these signals.
Battery Troubleshooting
Troubleshooting
...
Battery Sensor Repair procedures
Removal
1.
Disconnect the battery negative (-) cable.
2.
Disconnect the battery sensor connector (A).
3.
Remove the battery negative (-) cable after removing the bolts (B).
Installation
...
See also:
Smart Cruise Control Unit Repair procedures
Removal
1.
Remove the bumper cover.
(Refer to Body - "Front Bumper Cover")
2.
Disconnect the smart cruise control unit connector (A).
3.
Loosen the nuts (B) and then remove the smar ...
Damper Clutch Control Solenoid Valve Description and Operation
Description
Damper Clutch control solenoid valve is attached to the valve
body. This variable force solenoid valve directly controls the
hydraulic pressure inside the Damper Clutch. ...
Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing
fuse/relay name and capacity.
✽ NOTICE
Not all fuse panel descriptions in this manual may be applicable to ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com