Hyundai Equus: Alternator Specifications
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Engine Electrical System / Charging System / Alternator Specifications
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Engine Electrical System / Charging System / Alternator Specifications
| Specification |
| Item | Specification |
| Rated voltage | 13.5V , 180A |
| Speed in use | 1,000 ~ 18,000rpm |
| Voltage regulator | IC Regulator built in type |
| Regulator reform mode voltage (V) [COM terminal] | 13.85 ~ 14.85 (-35°C) |
| 13.85 ~ 14.80 (15°C) | |
| 13.15 ~ 14.75 (50°C) | |
| Regulator Setting Voltage (V) [COM terminal] | 11.6 ~ 15.4 |
Alternator Description and Operation
Description
The Alternator has eight built-in diodes, each rectifying AC current to DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the charging voltage of this ...
Alternator Schematic Diagrams
Circuit Diagram
•
COM signal - When
controlling the voltage generated, the ECM sends the target voltage data
to the alternator via a PWM signal.(High voltage: 4V or h ...
See also:
Tire and loading information label
The label located on the driver's door sill gives the original tire size, cold
tire pressures recommended for your vehicle, the number of people that can be in
your vehicle and vehicle cap ...
Tire Repair procedures
Tire Wear
1.
Measure the tread depth of the tires.
Tread depth [limit] : 1.6 mm (0.063 in)
2.
If the remaining tread (A) depth is less than the limit, replace the tire.
...
Presure Switch Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Categories
Hyundai Equus Manuals
© 2011-2025 Copyright www.heqmanual.com