>
1. Check fuel level.
2. With the Engine Start/Stop Button in the OFF position, check all connectors at
ignition coils and spark plugs. Reconnect any that may be disconnected or loose.
3. If the engine still does not start, call an authorized EQUUS dealer or seek other
qualified assistance.
Reprogramming a single HomeLink® button
To program a new device to a previously trained HomeLink® button, follow these
steps:
1. Press and hold the desired HomeLink® button. Do NOT release until step 4 has
been completed.
2. When the ...
Hood Seal Weatherstrip Repair procedures
Replacement
1.
Detach the clips, then remove the hood seal weatherstrip (A).
•
Be careful not to scratch the hood seal weatherstrip.
2.
Installation is the rever ...
Interior rearview mirrors
Before you start driving, adjust the rearview mirror to center on the view through
the rear window.
WARNING
Make sure your line of sight is not obstructed. Do not place objects in the
rear seat, ...