Hyundai Equus: Intake Actuator Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Heating, Ventilation and Air Conditioning / Blower / Intake Actuator Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Heating, Ventilation and Air Conditioning / Blower / Intake Actuator Description and Operation
| Description |
The intake actuator is located at the blower unit. It
regulates the intake door by a signal from the control unit. Pressing
the intake selection switch will shift between recirculation and fresh
air modes.
Climate Control Air Filter Repair procedures
Replacement
1.
Remove the stopper (B) from the glove box (A).
2.
Disconnect the air damper (A) from the glove box (B).
3.
Remove the filter cover (A) by pressing the knob.
4.
Replace t ...
Intake Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 ...
See also:
Intake Air Temperature Sensor (IATS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
Specification: Refer to "Specification"
...
Blind spot detection system (BSD) (If equipped)
The BSD (Blind spot detection) system uses a radar sensor to alert the driver
while driving.
It senses the rear side territory of the vehicle and provides information to
the driver.
(1) BSD (B ...
Cool and warm box (if equipped)
To open the box, pull up the lever(1).
If you press the operate button (2) once, the indicator on the button will be
illuminated blue and then you can keep drinks cool. If you press the operate b ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com