>
Specifications |
Item | Specifications | ||
Slide, Front/Rear Height | Recline/Cushion/Headrest | ||
Main Power Seat Position Sensor | Operating Voltage | DC 3.8V ~ 24V | |
Consumption Current | Typ 3mA , Max 7mA | ON : 5.7mA(Recline, Cushion) ON : 4.1mA(Headrest) | |
Type | Hall sensor | Hall sensor | |
ON : OFF ratio | 50±15% | 50±10%( Cushion/Headrest) 0.5(Recline) | |
Continuity current | 100mA | 25mA(Cushion/Headrest) 8mA(Recline) | |
Main Power Seat Manual SW | Type | Self return | |
Chattering time | Max 10msec | ||
Limit SW | Type | Open at the adjustment limit position (Normal Close) | |
Contact Current | Max 8A |
Item | Slide | Recline | Height | Headrest | IMS | Cushion extension | Easy Access ON/OFF |
Driver | O | O | O | O | O | O | 1) |
Assist | O | O | X | O | X | X | X |
Rear left | O | X | X | X | X | X | O |
Rear right | O | X | X | O | X | X | O |
Rear Door Window Glass Repair procedures
Replacement
1.
Pull down rear door window glass by pressing the power window glass switch.
2.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
3.
After loosening the mo ...
Start-Up
You can start the engine without inserting the key. For detailed information
refer to the Engine Start/Stop Button in section 5.
CAUTION
To prevent damaging the Smart Key :
Keep the Smart Key ...
ECU Schematic Diagrams
Circuit diagram
1.
ECU Connector
2.
ECU Terminal function
TerminalFunction1Ground2Ground3IGN4Battery5Battery6-7-8-9-10-11-12Reverse Valve 1x(M1 Low Side)13Ambiance Valve14Reverse Valve 2x( ...