Hyundai Equus: Telemetics Unit (TMU) Repair procedures
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / MTS System / Telemetics Unit (TMU) Repair procedures
| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the front AVN monitor.
(Refer to "Premium AVN System") |
| 3. |
Remove the MTS unit after loosening the screw and nuts.
|
| 4. |
Disconnect the cables and connectors from the MTS unit. |
| Installation |
| 1. |
Install the MTS unit after connecting the cables and connectors. |
| 2. |
Install the front AVN monitor. |
| 3. |
Connect the negative (-) battery terminal. |
Telemetics Unit (TMU) Components and Components Location
Component
Connector Pin Information
No.DescriptionNo.Description1Ground17Battery 22Ground18Battery 13-19IGN 14Keypad ground20ACC5MIC output -21Airbag6MIC output +22Keypad input7-23-8RS422 shie ...
BlueLink Control Switch Components and Components Location
Components
...
See also:
Front Door Inside Handle Repair procedures
Replacement
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
Disconnect the front door inside handle lamp connector (A).
3.
After loosening the mounting screws ...
27 Brake Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Checking the amount of air conditioner refrigerant and compressor lubricant
When the amount of refrigerant is low, the performance of the air conditioning
is reduced. Overfilling also has a negative impact on the air conditioning system.
Therefore, if abnormal operation is ...
Categories
Hyundai Equus Manuals
