Hyundai Equus: Center Control Panel (CCP) Repair procedures
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Premium AVN System / Center Control Panel (CCP) Repair procedures
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Premium AVN System / Center Control Panel (CCP) Repair procedures
| Removal |
Front Keyboard Unit
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the floor console upper cover.
(Refer to Body - "Floor console assembly") |
| 3. |
Disconnect the connector from the console upper cover.
|
| 4. |
Remove the front keyboard unit (A) after loosening the mounting screws.
|
| Installation |
Front Keyboard Unit
| 1. |
Install the front keyboard unit to the console upper cover. |
| 2. |
Install the floor upper cover to the floor console. |
See also:
6 Speed Clutch Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Engine Coolant Temperature Sensor (ECTS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Remove the ECTS (Refer to "Removal").
3.
After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECT ...
General Information
The Micro 570 Analyzer
The Micro 570 Analyzer provides the ability to test the
charging and starting systems, including the battery, starter and
alternator.
x Because of ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com