>

Hyundai Equus: Height Adjust Repair procedures - Front Seat Belt - Body (Interior and Exterior) - Hyundai Equus VI 2009-2025 Service ManualHyundai Equus: Height Adjust Repair procedures

Replacement
1.
Remove the front seat belt upper anchor.
(Refer to Front Seat Belt - "Front Seat Belt Pretensioner")
2.
After loosening the mounting bolts, then remove the height adjustor (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
   
•
Replace any damaged clips.
    Height Adjust Components and Components Location
    Component Location 1. Height adjust ...

    Front Seat Belt Buckle Components and Components Location
    Component Location 1. Front seat belt buckle ...

    See also:

    Rear console storage
    To open the console storage, push the open button. After using the console storage, make sure to close it. ...

    Troubleshooting
    Failure Diagnosis 1. In principle, ESP and TCS controls are prohibited in case of ABS failure. 2. When ESP or TCS fails, only the failed system control is prohibited. 3. However, when the ...

    Injector Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance between the injector terminals 1 and 2. 4. Check that the resistance is within t ...

    Categories

    Hyundai Equus Manuals

    © 2011-2025 Copyright www.heqmanual.com