>
Replacement |
1. |
Remove the sunroof assembly.
(Refer to Sunroof - "Sunroof Assembly") |
2. |
After loosening the mounting screw, then remove the drip link (A) and sunshade stopper (B). |
3. |
Remove the sunshade (C) and drip rail (D). |
4. |
Install in the reverse order of removal. |
Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing
fuse/relay name and capacity.
✽ NOTICE
Not all fuse panel descriptions in this manual may be applicable to ...
Rear Bumper Beam Assembly Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...
Windshield wipers
Operates as follows when the ignition switch is turned ON.
MIST :
For a single wiping cycle, push the lever upward and release it with the lever
in the OFF position. The wipers will operate conti ...