>
Auto Head lamp leveling Unit Repair procedures
Removal
1.
Remove the head lamp leveling unit linkage (A) from trailing arm.
2.
Loosen the mounting bolts (3EA) of automatic head lamp leveling unit assembly.
Tightening torque :
3 ~ 5 N.m ...
Cylinder Block Components and Components Location
Components
1. Cylinder block bank cover2. Cylinder block bank cover gasket3. Cylinder block rear cover4. Cylinder block rear cover gasket5. Separator6. Drain plug7. O-ring8. Piston oil jet9. Chec ...
Power Seat Motor Repair procedures
Inspection
Slide Motor Limit Switch
1.
Disconnect the limit switch (A) and operate the limit switch.
2.
Check for continuity between the terminals.
3.
Make sure that the seat operation is ...