Hyundai Equus: Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Automatic Transmission System (SBC) / Hydraulic System / Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Automatic Transmission System (SBC) / Hydraulic System / Description and Operation
| Description |
The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves).
The oil pump is powered by the engine. ATF passes through the oil filter and gets distributed along the oil channels.
The oil becomes highly pressurized as it exits the oil pump
and passes through the line pressure valve before being fed to the
clutch & brake control valve, clutch, and brakes. TCM controls the
hydraulic pressure using solenoid valves and controls clutch and brake
operations.
Hydraulic System
...
Components and Components Location
Components Location
1. Oil pump assembly2. Automatic transmission3. Valve body assembly4. Oil pan
...
See also:
Side Impact Sensor (SIS) Repair procedures
Removal
•
Removal of the airbag must be performed according to the precautions/procedures described previously.
•
Before disconnecting the side impact sensor conn ...
Components and Components Location
Component Location
1. Fuel filler door
...
Emergency braking
If there is a problem with the foot brake while driving, emergency braking is
possible by pulling and holding the EPB switch.
However, braking distance will be longer than normal condition.
WARNIN ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com