>

Hyundai Equus: Description - Head up display (HUD) (If equipped) - Features of your vehicle - Hyundai Equus 2009-2026 Owners ManualHyundai Equus: Description

The head up display is a transparent display which projects a shadow of some


The head up display is a transparent display which projects a shadow of some information of the instrument cluster and navigation on the windshield glass.

  • The head up display image on the windshield glass may be invisible when:

- Sitting posture is bad.
- Wearing a polarized sunglasses. - There is an object on the cover of the head up display.
- Driving on a wet road.
- An inadequate lighting is turned on inside the vehicle.
- Any light comes from the outside.
- Wearing glasses.

  • If the head up display image is not shown well, adjust the height or illumination of the head up display in the LCD display.
  • When the head up display needs inspection or repair, have your vehicle inspected by an authorized EQUUS dealer.

WARNING - Head Up Display

  • Do not tint the front windshield glass or add other types of metallic coating. Otherwise, the head up display image may be invisible.
  • Do not place any accessories on the crash pad or attach any objects on the windshield glass.
  • As the Blind Spot Detection (BSD) system is a supplemental device for your safe driving, it may be dangerous to rely on only the BSD information of the head up display image when changing the lane. Always pay attention to drive safely.

CAUTION

When replacing the front windshield glass of the vehicles equipped with the head up display, replace it with a windshield glass designed for the head up display operation. Otherwise, duplicated images may be displayed on the windshield glass.

    Head up display (HUD) (If equipped)
    ...

    Head Up Display ON/OFF
    To activate the head up display, press the HUD button. If you press the HUD button again, the head up display will be deactivated. ...

    See also:

    Rear Wheel Speed Sensor Repair procedures
    Removal 1. Remove the rear wheel speed sensor mounting bolt. Tightening torque: 6.9 ~ 10.8 Nm (0.7 ~ 1.1 kgf.m, 5.1~ 8.0 lb-ft) 2. Remove the rear wheel guard. 3. Disconnect the rea ...

    Front Wiper Motor Components and Components Location
    Components 1. Nut cap2. Nut3. Wiper arm4. Wiper blade5. Cowl top cover braket6. Cowl top cover7. Washer bolt8. Wiper motor & linkage assembly ...

    Presure Switch Repair procedures
    Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com