Hyundai Equus: Components and Components Location
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Keyless Entry And Burglar Alarm / Components and Components Location
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Keyless Entry And Burglar Alarm / Components and Components Location
| Component Location |
| 1. Hood switch 2. Burglar horn 3. BCM 4. Key warning switch 5. Front door switch | 6. Front door lock actuator & switch 7. Rear door lock actuator & switch 8. Rear door switch 9. Trunk module switch 10. Buzzer |
Specifications
Specification
ItemSpecificationPower source3VOperating temperature-20°C ~ +60°C (-4°F ~ +140°F)RF ModulationFSKLF ModulationASKRF frequency433.92MHzLife of battery2years or more (at 20 times ...
Description and Operation
Description
Burglar Alarm State [B/A State]
B/A StateDescriptionDISARM
1.
In "DISARM" state, no vehicle start inhibition. So, when
door, hood, or Tailgate is opened, there is no alarm sound ...
See also:
Before starting
Close and lock all doors.
Position the seat so that all controls are easily reached.
Adjust the inside and outside rearview mirrors.
Be sure that all lights work.
Check all gauges.
Check ...
Auto Defogging Actuator Description and Operation
Description
The auto defogging sensor is installed on front window glass.
The sensor judges and sends signal if moisture occurs to blow out wind
for defogging. The air conditioner control modul ...
Presure Switch Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com